IMPACT WRENCH 1/2" 18V BL 330NM

Variable speed controlled by trigger
3 air volume settings for low, medium and high
Increased air volume
Vacuum function; can be used as a vacuum with the addition of a dust
bag
Equipped with battery protection circuit
Maximum air velocity 98 metres per second
Maximum sealed suction 5,8 kPa
Not compatible with G-Series batteries

Makita ImpactXPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The ImpactXPS 1/2 in. Square 2 in. Socket Adapter is designed exclusively for use with high-torque impact drivers and is engineered to last up to 90-times longer than a standard adapter. Chamfered edges of the square drive end allows for easy installion and a retention ball helps secure the socket. The high quality steel construction provides increased durability and features a matte nickel surface for best in class corrosion resistance.

ANGLE GRINDER 4-1/2

Makita's 5-Inch SJS Angle Grinder (model GA5020) combines 10.5 amp power with comfort and motor-protection features for longer-lasting industrial performance. The GA5020 is engineered with Makita's innovative Super Joint System (SJS) to protect the gears for longer tool life. View larger GA5020 Features POWER - 10.5 amp motor delivers 11,000 rpm PERFORMANCE - Super Joint System (SJS) helps prevent gear damage DURABILITY - Labyrinth construction, zig-zag varnish, and thicker coil wires for longer tool life DESIGN - Electric br

Super Joint System (SJS) technology helps prevent gear damage caused by accidental wheel binding
Powerful 10.5 AMP motor delivers more output for increased performance
Electric brake for maximum productivity
Rotatable gear housing can be positioned every 900
Refined design at only 5.9 lbs. for reduced operator fatigue
AC/DC switch for use with alternative power source
Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
Externally accessible brushes for greater serviceability

All ball and needle construction for long life
6,000 RPM for optimum material removal
Extra heavy-duty motor for high production and continuous use
Removable side handle can be mounted on either side
Accepts 7" or 9" wheel with correct guards
Rugged housing for long life
AC/DC switch for use with alternative power source
Spindle lock for easy wheel changes
Standard 5/8" - 11 UNC spindle for various accessories

1/4" Paddle Switch Die Grinder, with AC/DC Switch

The Makita 1/4 Inch paddle switch die grinder is powered by a powerful 3.5 Amp motor that delivers 25000 RPM. Protective zig-zag varnish seals the armature so that no dust or debris enters. Labyrinth construction offers long lasting durability by preventing the entry of debris to motor, bearings and gears. Round-shaped collet nut is designed to avoid damages/scratches to work piece. Rubberized gear housing for enhanced operator comfort while the stepped neck allows for working in tights spaces. Directional air-flow vents channel the tool's air output away from the operator. The grinder is perfect for welders, plumbers, ship builders, automotive, HVAC and more. Paddle switch die grinder produces just 73 dB which helps to reduce workplace noise.

The Makita 5 in. Disc Sander delivers power, precision and ease of use in a compact size, with a 4.2 Amp motor that puts out speeds up to 4500 RPM for fast and efficient sanding. It combines comfort and motor-protection features for longer-lasting performance, even in high production settings. The sander features a lightweight design (2.6 lbs.) and an ergonomic soft grip for added control and comfort on the job.

Ideal For Welding and Forming Plastics, Heat Shrink Tubing, Soldering Copper Pipe, Bending Plastic Pipe, Thawing Metal Pipes, Activating/De-Activating Adhesives and Putties, Stripping Paint And More!
3-Stage Air Volume Control, LCD Push-Button Variable Temperature
Control
LCD push-button variable temperature control enables incremental 50?C temperature adjustments to achieve precise heating requirements
3-stage air volume control (Cooling, Low, High) provides versatility in a wide range of applications
Rear housing design with integrated rubber bumpers allows tool to be positioned upright for use as a static heating source during two-handed operations
Ergonomic soft rubber grip design for comfortable operation

Makita HM1211B Specifications:
o Blows/min.(BPM) 2000
o Impact Energy 14.2
o AMPS 10.0
o Bit type 3/4" Hex

Makita HM1211B Includes:
o Hex wrench (#4; 783202-0, #8; 783210-1)
o Plastic tool case (150589-9)

Makita HM1211B Features:
o Accepts commonly used 3/4" steel
o Powerful 10 AMP motor (2,000 BPM) for fast and efficient operation
o Comfortable rubber D-shaped grip side handle absorbs vibration; secures in four positions for operator convenience in any position
o One touch latch bit retainer for quick bit changes
o Automatic brush cut-out when periodic servicing is due
o Factory grease packed for reduced maintenance

o Powerful 14.0 AMP motor to handle the most demanding applications
o Constant Speed Control automatically applies additional power to the motor to maintain consistent speed under load for the most challenging jobs
o Soft Start suppresses start-up reaction for more control and better accuracy
o Variable Speed control dial enables user to match the speed to the application for greater versatility
o L.E.D. Service Light notifies the user approximately 8 hours before the brushes need to be replaced
o L.E.D. Power Lights indicate switch failure or cord damage
o Makita Motor Advantage includes field core interlocking steel laminations, dual ball bearing armature, and large surface commutator with the highest quality raw materials, resulting in efficient transfer of energy for greater power
o Extended Life Brushes are longer for more work between service intervals and less downtime
o Automatic Brush Cut-Off protects commutator from damage for longer tool life
o Durable blow-molded rolling tool case for safe storage and easy transportation
o "No hammering when idling" helps increase tool life
o Rubberized ergonomic soft grip provides more comfort and control
o Easy-to-operate slide switch increases productivity and allows for continuous use
o Side-handle swivels 360? for greater control
o Accepts commonly used 1-1/8'' Hex steel

FEATURES:
o Powerful 6.0 AMP motor with 0-2,800 RPM & 0-44,800 BPM for the most demanding applications
o Lightweight (4.4 lbs) with large drilling capacity up to 5/8" in concrete o 2-mode operation for "Rotation Only" or "Hammering with Rotation" for multiple applications
o Soft grip handle provides increased comfort on the job
o Extended life brushes are longer for more work between service intervals and less downtime
o Recessed lock-on button for continuous use
o All-ball bearing construction for longer tool life

The Makita 3/4 in. 2-Speed Hammer Drill has variable-speed operation to help with starting holes in concrete and steel. Start with low gear for speeds up to 900 RPM and 18,000 BPM. Then switch to high to take advantage of up to 2,300 RPM and 46,000 BPM. The 1/2 in. keyed chuck is powered by a 6 Amp motor and ball bearings translate to years of dependable use. This hammer drill also has adjustable side handles and a depth gauge for drop-in anchors. It comes with a storage case.

Powerful 6 AMP motor for the most demanding applications
2-speed (0-900 & 0-2,300 RPM) with speed control switch
2-mode operation for "Rotation Only" or "Hammering with Rotation" for multiple applications
Variable speed switch for easy starting of holes
All-ball bearing construction for longer tool life
Adjustable side handle for greater control
Depth gauge for "drop-in" type anchors
Recessed lock-on button for continuous use
Lightweight (6.4 lbs.) for reduced operator fatigue
Double insulated

CXT HAMMER DRIVER DRILL 12V

INCLUDES:
o (1) Side Handle (451749-9)
o (1) Depth Gauge (331886-4)
o (1) Tool Case (824695-3)

FEATURES:
o Powerful 7 AMP motor delivers 2.1 ft.lbs. of impact energy to handle the most demanding applications
o Anti-Vibration Technology (AVT(R)) is an internal counterbalance system that greatly reduces vibration by moving a counterweight in the opposite direction of drive piston
o Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
o Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
o L.E.D. light illuminates drilling surface for more productivity in low light applications
o Recessed hammer function selector located below gear housing for improved durability
o Variable speed trigger enables user to match the speed to the application for greater versatility
o 3-mode operation for various applications with "Rotation Only", "Hammering with Rotation" or "Chipping Only" functions
o 40 bit angle settings allow the bit to be set at different positions for operating convenience
o Ergonomic "Pistol-grip" handle with rubberized soft grip for increased comfort
o "No hammering when idling" function helps increase tool life
o Designed to reduce dust exposure in drilling applications with dust extraction accessory (part no.195173-3)

SPECIFICATIONS:
o Amps: 7
o Capacity (Concrete Drilling): 1"
o Capacity (Concrete Drilling w/ Core Bit): 2-11/16"
o Impact Energy (Joules): 2.9 J
o Impact Energy (ft. lbs): 2.1
o Vibrations (m/s2): 11.5
o Blows Per Minute (Variable Speed): 0 - 4,600 BPM
o No Load Speed (Variable Speed): 0 - 1,200 RPM
o Overall Length: 15-1/8"
o Cord Length (ft): 13.1'
o Bit Type: Accepts SDS-Plus
o Sound Rating (Decibels): 90 dB (A)


The Makita 1 in. AVT rotary hammer (model HR2611F, with pistol-grip) is engineered with anti-vibration technology (AVT(R)), an internal counterbalance system for significantly less vibration. The HR2611F combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling. The HR2611F has a 7 AMP motor that delivers 2.9 joules (2.1 ft. lbs.) of impact energy to handle the most demanding applications. The 3-mode operation offers rotation only, hammering with rotation or chipping only for multiple applications. Modes can be easily changed with a recessed hammer-function selector, which is located below the gear housing for improved durability. The LED light at the base of the tool's pistol grip illuminates the work surface in low-light conditions. The HR2611F is engineered for a range of applications including overhead drilling into concrete, wood and metal, removing tile, and more. It is ideal for a range of trades including masons, plumbers, electricians, sprinkler installers, city maintenance crews, and general contractors seeking a best-in-class 1 in. rotary hammer.